German uniforms from World War 1 I THE GREAT WAR Special
Stahlhelm and German War Veterans Association militaria.
GSH-01 WWII Stahlhelm 1932 Dated Colors Badge and Lapel.
The upper pin is a white alloy shield black enamel from the chamber F Ortsgruppe Bevensen dated 1932 with the profile of the helmet Der Stahlhelm on the face.
It measures 7 8 8 inches by 1-1 It has no manufacturer marks, and a single roll pin welded closure.
The pin paper is in the German national colors around 1932 Round measuring 1 inch in diameter portion.
The condition is near very good condition with slight wear and freckles on the face of the card, as shown.
GshA-01 German World War Two 50 years Triffern II Stahlhelm 1936 Made pine Paper Back Badge.
This is 1-1 2 x 2 inches badge shield style in excellent close state.
This is a 1929 dated Stahlhelm Mьnchen edelweiss tinnie.
It is a white alloy in three dimensions of a mountain flower edelweiss room with black enamel letters identifying the opportunity that the 10th meeting of Reichsfrontsoldatentag N E S T with Der Stahlhelm headset profile on the face.
It measures 1-1 2 inches in diameter, it does not mark machine he had simply welded closure spring pin, but the pin is absent.
The condition is near excellent, except the absence of pins, as shown.
This is a 1929 dated Stahlhelm Mьnchen edelweiss tinnie.
It is a white alloy in three dimensions of a mountain flower edelweiss room with black enamel letters identifying the opportunity that the 10th meeting of Reichsfrontsoldatentag N E S T with Der Stahlhelm headset profile on the face.
It measures 1-1 2 inches in diameter, it does not machine brands it has simple elastic pin welded closure.
The condition is near excellent, except the absence of pins, as shown.
This is an undated 1932 Stahlhelm 13 RFST Rally Berlin tinnie.
It is a white alloy three-dimensional one piece highly stylized eagle with black enamel letters identifying the opportunity that the 13th meeting would be 1932 Reichsfrontsoldatentag RFST with Der Stahlhelm headset profile on the face and on BERLIN wings.
It measures 1-1 2 inches in diameter, it does not mark machine he had simply welded closure spring pin, but the pin is absent.
The condition is near excellent condition, as shown.
This is a 1933 dated 14 Stahlhelm RFST Rally Hanover tinnie.
It is a white alloy in three dimensions one-horse town emblem piece Hannover and raised lettering identifying the opportunity that the 14th meeting of Reichsfrontsoldatentag RFST the profile overcome Der Stahlhelm helmet and HANNOVER, with the cross of Malta German First World War.
1-5 it measures 8 inches in height has no machine brand He simple elastic pin welded closure.
The condition is near excellent condition, as shown.
GVLP-202 German World War One war veteran Bavaria money Pin in blue Pinback Buttons enamel.
This is a service pin to former original Bavarian fighters and period that is made of silver and blue enamel design.
This highly detailed Bavarian pin is silver metal coupled with a blue ring and enamelled wording Bayerischer Kriegerbund Der Verdienst.
It measures about 50 mm by 42 mm and is stamped with Deschler Sohn Munchen It is very heavy and thick pine and supported.
This unique and rare Bavarian pine is used and tarnished, very good to excellent condition with no damage or abuse.
This pin and all other Bavarian pins as I just mentioned came from the same person who was from the region Furth in Wald.
This is a world war, German WWI veteran badge Deutsches Feld-Ehrenzeichen.
It is a white alloy die struck with a white cross and is enamelled applied separately from a German soldier combat He resurrected patent GESCH GHG and well stamped Hamburg 11 manufacturer brands in the back that has long crossed swords.
It was popular from 1931 to 1935 as noted war service without requiring adherence to other veterans organizations such as the Stahlhelm It was banned in 1935.
Here is a view from the back with the rod down, and with the pin to show the stamped manufacturer brands.
This is a world war, German WWI veteran badge Deutsches Feld-Ehrenzeichen.
It is a white alloy die struck with a white cross and is enamelled applied separately from a German soldier combat He resurrected patent marks on the back GESCH GHG This has long crossed swords It is slightly arched.
It was popular from 1931 to 1935 as noted war service without requiring adherence to other veterans organizations such as the Stahlhelm It was banned in 1935.
Here is a view from the back with the rod down, and the other to show the high patent brand.
This is a German World War II veteran of the First World War badge war service.
He hit a white alloy die-it seems to be the silver coin with a cross crown war service and dedication plate applied separately to the suspension bar There are no apparent trace of the manufacturer or content on the back the dedication reads unserem Verehrten Mitbürger Für wertvolle Dienste Während Kriegs Our honored citizen for precious defense services of war.
GVLP-24 German First World War Veteran Prince Leopold service badge Infantry Regiment.
This is a 35mm by 43mm German World War II veteran of World War I Royal Bavarian 7th Infantry Regiment ribbon Prince Leopold badge with encryption and the unit name plate.
It is a gold alloy struck under pressure with the cross and crown overcome and infantry rifles from the First World War There are no manufacturer markings on the back.
Here is a rear view showing just taking safety pin.
GVLP-25 German Bavarian WWI Veteran Combat Service Badge.
This is a 35mm by 110mm German World War II veteran of World War I battle ribbon Veterans Association Bavarian royal badge with identification Bayreuth and the Bavarian arm with shield and crossed swords.
It is a die-struck alloy gilded crown dating to overcome WWI ago of brands DESCHLER SOHN MЬNCHEN-Geisling on the back and on the face GESCH GHGs.
Here is a rear view showing a simple decision-spring pin.
The condition is near very good with slight wear to the enamel, as shown.
This is a 35mm by 55mm World War, German World War Bavarian royal insignia tape encryption.
It is a white alloy hit with the dice overcome crown dating to World War there are brands manufacturer M Heinloth.
Here is a rear view showing a simple decision-spring pin.
This is a 20 mm by 25 mm World War II German World War I Austria shield badge and helmet.
It is a white alloy hit with the dice overcome crown dating to World War There are brands manufacturer J Schwertner EGGENBERG.
Here is a rear view showing a simple decision-spring pin.
We also have several pieces of glassware available from the same association, if you are interested.
This is a 28mm by 16mm World War II German World War I veteran eagle badge stickpin.
It is a white alloy die-struck with a black cross of enameled iron He resurrected Patent and 6 GESCH GHG manufacturer marks on the back This short crossed swords.
This is a 25mm by 13mm World War II German World War I veteran eagle badge stickpin.
It is a white alloy die struck with a cross of black enameled iron He resurrected patent marks on the back GESCH GHG This has long crossed swords.
This is a 24mm by 13mm World War II German World War I veteran eagle badge stickpin.
It is a white alloy die struck with a cross of black enameled iron It resurrect patents and trademarks GESCH GHG 1 Deschler manufacturer brand back This has long crossed swords, and slightly arched through design.
The condition is near mint, with the exception of some dull age, as shown.
This is a 25mm by 13mm World War II German World War I veteran widow orphan eagle gold stickpin badge.
There is a brass alloy struck with a black iron die-Cross enamelled It resurrect patent marks on the back GESCH GHG This has long crossed swords.
This is a 24mm by 31mm World War, the German 25-year veteran signal service stickpin.
It is brass die struck with a black, white and red national flag separately applied to a silver alloy crown with 25 discs There are stamped patent marks on the GESCH GHG back.
This is a German 23mm World War II Veteran Badge stickpin.
It is brass die struck with a black, white and red national flag with green oak leaves in enamel The patents are stamped marks on the GESCH GHG back.
This is a 17mm by 13mm World War II German World War I veteran enamel badge stickpin.
It is brass hit with a tricolor flag die-black, white and red flag enamel He resurrected patent marks on the GESCH GHG back.
This is a 17mm by 13mm World War II German World War I veteran enamel badge stickpin.
It is brass hit with a tricolor flag die-black, white and red flag enamel He resurrected patent marks on the GESCH GHG back.
Stahlhelm and Veterans Association GERMAN MILITARY, Stahlhelm, German, veteran.